Daban-daban Laser ikon a kan sabon sakamako

Yanke Laser shine amfani da Laser yankan kai don mayar da hankali kan katako na Laser a saman kayan don narke kayan, yayin amfani da coaxial gas coaxial da aka matsa zuwa katako na Laser don busa kayan da aka narke, da yin katako na Laser da kayan. tare da wani yanayi a matsayin motsi na dangi, don haka samar da wani nau'i na kabu.A cikin tsarin yankan Laser, ikon fitarwa na Laser kai tsaye yana rinjayar ƙarfin narkewa na kayan da aka sarrafa, don cimma sakamako mafi kyau, ya zama dole don ƙara ƙarfin fitarwa don buƙatun inganta ƙarfin aiki.

Don haka, ta yaya za mu gaya idan ikon fitarwa na laser ya dace?Wasu ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙila ba su sani ba, don haka injiniyoyin fasahar Laser na Guanghui sun kawo muku tabbataccen hanya.

Gabaɗaya, zamu iya yin hukunci ta hanyoyi biyu:

(1) Kula da yanayin giciye bayan yanke;

(2) Kula da yanayin walƙiya yayin aikin yankewa.1

Yanke sassan

Ɗaukar yankan farantin ƙarfe na carbon da aka fi sani da shi a matsayin misali, lokacin da ƙarfin laser ya dace, alamomin igiyar ruwa a saman yankan sun fi laushi, tazara tsakanin alamun raƙuman yana da ƙananan ƙananan, kuma ƙananan ɓangaren yankan yana nuna jihar kadan kadan dangane da alkiblar yankan tafiya.

Lokacin da ƙarfin Laser ya yi girma, ƙwanƙwasa ƙwanƙwasa suna tsaye sama da ƙasa, kuma tazara tsakanin alamun zai zama mafi girma.

Lokacin da wutar lantarki ta yi ƙarami, ƙananan ɓangaren yankan zai zama mai tsanani, dregs da wuya a cirewa, ƙara rage ƙarfin fitarwa, kuma kayan za su kasance marasa ƙarfi.

Yanke yanayin walƙiya

Wutar kyalkyali a ƙarƙashin kayan yankan yana shafar ruwa na narkakken ƙarfe a cikin kabun yanke, don haka yana iya yin la'akari da ko ikon laser ya dace.

Idan tartsatsin ya kasance madaidaiciya kuma dan kadan baya bayan jagorancin yanke tafiya, yana nuna cewa wutar lantarki ta fi dacewa.

Idan tartsatsin yana cikin sifar watsawa ko gaba da hanyar yanke, ba a saita wutar lantarki ta saman yadda ya kamata.

Ana iya samun waɗannan buƙatu masu zuwa don haɓaka ƙarfin sarrafawa ta hanyar haɓaka ƙarfin fitarwa na Laser:

1

Gudun yankan ya yi jinkiri sosai kuma kuna son hanzarta saurin yankewa

Misali, an yanke farantin karfen carbon guda 5mm tare da oxygen, kuma ana yanke Laser da Laser 1KW, 2KW da 3KW, kuma gudun shine 1.4m/min, 1.8m/min, bi da bi.2.5m/min.

2

Kaurin kayan da za a yanke yana da kauri

Kamar yankan carbon karfe farantin, matsananci yankan, 1KW iya yanke 12mm, 2KW iya yanke 20mm, 3KW iya yanke 25mm.

3

Yanke abubuwa masu haske sosai kamar zinariya, azurfa, jan karfe da aluminum

Misali, a yanayin yankan matsananci, ana iya yanke kauri na carbon karfe 25mm tare da Laser 3KW, amma kauri 8mm kawai za a iya yanke;Don yanke aluminum tare da kauri guda 25mm, kuna buƙatar ƙara ƙarfin zuwa 8KW.

Kula da sashin giciye bayan yankewa da yanayin walƙiya a lokacin tsarin yanke shine mahimman tushe guda biyu don yin hukunci ko ikon laser ya dace, bayan fahimtar waɗannan, ana iya daidaita ikon laser daidai gwargwadon waɗannan a cikin tsarin yankan Laser na gaba.